TWELVE STEPS TO FREE-MOTION QUILTING

 Lori Kennedy

12 Steps to FMQ
12 Steps to FMQ
12 Steps to FMQ
Advertisements

Are you ready to machine quilt?  In less than five minutes, you can have your machine ready to create gorgeous free motion quilting (FMQ).

Whether your sewing machine is old or new, like the BERNINA 770 QE that I use for all of my quilting, there are a few machine adjustments required to allow the quilt to move freely and to ensure perfect stitches.

  1. Clean and oil
  2. Thread the bobbin
  3. Attach a Straight Stitch Plate
  4. Insert a new needle
  5. Attach a Darning Foot
  6. Tape Down a Teflon Sheet
  7. Lower the Feed Dogs
  8. Set Needle Down Function
  9. Thread the top thread
  10. Stitch a sample
  11. Adjust tension
  12. Start quilting!

Clean and Oil

Advertisements

The rapid stitch rate (up to 1000 stitches/minute) of quilting over fabric and batting leads to lint build up in the bobbin case. Keep your bobbin case clear of lint and loose threads with frequent cleaning and oiling so the hook can make a perfect stitch.

12 Steps to FMQ

Thread the Bobbin

Once you start quilting you won’t want to stop, so make extra bobbins. Even with BERNINA’s extra large bobbins, you’ll need at least three full bobbins to get started.

12 Steps to FMQ

Attach a Straight Stitch Plate

The Straight Stitch Plate has a smaller opening than the Standard Stitch Plate used for general sewing. The narrow opening provides more support to the quilt as the needle penetrates it and prevents the fabric from being pushed into the needle opening.

12 Steps to FMQ
Advertisements

The Straight Stitch Plate is essential to create beautiful quilting stitches.

12 Steps to FMQ

If your machine has a Security Function, enter the Straight Stitch Plate option. Your machine will then prevent stitching a wider stitch and damaging the needle when you return to general sewing.

Insert a New Needle

There are many needle types that are appropriate for Free Motion Quilting including Universal, Embroidery, Denim, Quilting, and my favorite, the Topstitch needle. Choose the size of the needle to match the weight of your thread. Replace your needle whenever starting a new project for best possible stitch formation.

12 Steps to FMQ

Attach a Quilting Foot

There are several BERNINA presser feet available for free motion quilting. Choose Darning Foot #9, Freehand Quilting Foot #29Embroidery Foot #15Drop Shaped Embroidery Foot #26, or my favorite, Freehand Embroidery Foot #24. I prefer Foot #24 because it is open-toed and offset, providing the greatest visibility.

12 Steps to FMQ

Tape Down a Teflon Sheet (Optional)

Advertisements

Many quilters attach a Teflon sheet over the sewing machine bed to reduce friction while quilting. The sheet helps the fabric move smoothly and results in more fluid stitches. Although the Supreme Slider clings to the sewing table, I always tape it down to prevent slippage.

12 Steps to FMQ

Lower the Feed Dogs

In normal sewing, the feed dogs advance the fabric with every stitch. In free motion quilting, the quilter controls the speed and the direction of the quilt without interference from the feed dogs.  Lower the feed dogs (usually a button on the side of the sewing machine) before quilting. Alternatively, set the stitch length to zero and the feed dogs will remain in the original position, but will not advance to fabric with each stitch.

Set Needle Down Function

By setting the Needle Down function, every time sewing stops, the needle will be in the down position. This is helpful to keep a continuous line of stitching when stopping to adjust the quilt position.

12 Steps to FMQ

Thread the Upper Thread

Advertisements

Thread the top thread as for normal sewing. Choose a decorative or embroidery thread for best results. Remember to have the presser foot in the “up” position for proper threading.

12 Steps to FMQ

Stitch a Sample

Stitch a sample whenever starting to sew or re-threading to test tension, thread color, etc.

Adjust Tension

The tension settings on BERNINA sewing machines are set for straight stitch sewing with Metrosene thread in both the upper and bobbin thread. Metrosene is a 50 weight polyester general purpose thread. Free motion quilting involves a bit of tugging and pulling and a wide variety of threads. Consequently, it is likely that tension adjustments will be required. I usually lower tension on my BERNINA 770QE to around 4.25 for the thread/fabric/batting combinations that I use. Tension will require adjusting for each project and each day as factors like humidity can also affect tension.

Start Quilting!

Once your tension is adjusted, and your stitches look perfect, you are ready to stitch! For more detailed explanations of the steps above, consult your sewing manual.

12 Steps to FMQ

For more than 100 free motion quilt tutorials (all FREE) as well as projects and inspiration, visit me at: www.theinboxjaunt.com.

Advertisements

IMPORTANT READ

Super Health Secrets

When asked about his secret of staying young, Dick Clark replied, ” it’s simple. Pick your parents carefully. “

Obviously, you can’t pick your parents, otherwise Ozzie and Harriet would have had thousands of children. However, who your parents are can have a huge impact on how long you live. Diseases that can cut your life short, like heart disease, Alzheimer’s, and most types of cancers, have a strong genetic connection.
Here is a detailed article that explains how you can avoid or reduce the impact these deadly diseases that you might have inherited.

READ THE FULL ARTICLE HERE

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out /  Change )

Google photo

You are commenting using your Google account. Log Out /  Change )

Twitter picture

You are commenting using your Twitter account. Log Out /  Change )

Facebook photo

You are commenting using your Facebook account. Log Out /  Change )

Connecting to %s